Accueil  Produits Spécifications
Sy48 Specifications
Up to 144 physical Inputs (128 mic/line or AES + 16 line)
- Assignable in Mono/Stereo/Multiple (XFAD mode)
- Input analog gain (SI-8D) -27 to +63 dB , 1.5 dB steps
- Input digital Gain (DI-8S/Src) -6 to +6 dB , 0.1 db Steps
- Delay up to 5000 Samples (100ms /30m @48kHz)
- Dynamics : Noise Gate, Expander, Compressor, Limiter 12 parameters
- Low Cut (12 dB/oct) 1/12 octave steps
- 4 bands Parametric EQ (Full Band, +/- 15 dB + Notch)
- Independent Pan/Balance for each channel in each Bus (Aux)
- Assignable as Group/ Aux / Masters / Matrix
- Mono, Stereo or LCR (XFAD mode)
- 40 bus on system Outputs (MO-8D, XO-8D, DO-8A, DO-8X, DO-8XES)
- 16 bus on DSP line outputs
| 2 monitor busses assignable to 3 various monitoring circuits and/or standard outputs |
- Up to 144 physical Outputs
- Up to 112 analog or AES outputs with or without HyperDrive processing (up to 128 Outputs with LEM)
- 16 send line
| HyperDrive Output processing (XO-8D, DO-8X and DO-8XES audio modules) |
- Dynamics : Gate, Expander, Compressor, Limiter 12 parameters
- 8 Bands Parametric EQ (Full band +/-15 dB + Notch)
- Delay up to 65000 samples (1350 ms / 400m @48kHz)
- Output Gain (+10 to +22dBu or -12 to 0dBFS)
| Sensoft - Real time console manager (Windows™ XPE operating system) |
- Real-time display of all mixing parameters
- console and fader function configuration
- Patch IN : inputs to faders assignement
- XFAD mode for inputs channels and output busses
- Assignable inserts (inputs, busses) and direct outputs
- Delay on inputs
- Channel processing controls
- Channel and bus routing and sends
- Independent panning per channel per bus
- Patch OUT : bus to outputs assignement
- Bus modes (mono, stereo, LCR, LCR+M)
- 16 internal processes for outputs
- Routing of processed Groups and Aux to Matrix or Master
- 16 external Inserts or busses
- Monitoring - 3 circuits and levels
- Monitoring input / output priority and modes
- File memories for shows
- Enhanced show software with New Q / Page display and control for theatre applications
- Load/Goto/Prev/Next Q / page recalls / Crossfade and Midi / MTC automation
- Midi Fader start and mute controls
- OverRam for updating through Q / pages
- Relax channels from automation
- Copy / Paste and Flat
- Off-Line mode
- Test signal (sine/white and pink noise)
- Off Line programming on PC
Pour plus d'informations, cliquez ici |
|
|
|
